Remove the fuel pump.

(Refer to Fuel Delivery System - “Fuel Pump”)

Disconnect the electric pump wiring connector (A) and the fuel sender wiring connector (B).

Disconnect the electric pump wiring connector (A) from the pump.

Remove the fuel sender (B) with sliding it downward after releasing the latch (C).

Remove the fuel pressure regulator & return hose assembly (A) after releasing the cap (B).

Remove the reservior cup (A) after releasing the three fixing hooks (B).

Remove the fuel feed tube (A) from the fuel filter after releasing the two fixing hooks.

Remove the plate assembly (B) after removing the cushion pipe fixing clip (C).

Extract the fuel filter (A) upward after releasing the two fixing hooks (B)

Installation is reserve of removal.