3.
Remove the service cover (A).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove or fold the rear seat cushion.
Remove the service cover (A).
Disconnect the fuel pump connector (A).
Disconnect the fuel feed tube quick-connector (B) and the fuel return tube quick-connector (C).
Support the fuel tank with a jack (A).
Disconnect the fuel filler hose (A), the leveling hose (B).
Unscrew the fuel tank band installation bolts (A), and then remove the fuel tank (B) from the vehicle.
Installation is reverse of removal.
Fuel tank band installation bolts:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
After removing or replacing the part below, bleed air in low pressure fuel circuit.
(Refer to Fuel Delivery System - "Bleeding Air in Low Pressure Fuel Circuit")
Fuel Tank
Fuel Sender
Fuel Filter
High Pressure Fuel Pump
Low Pressure Fuel Lines
