1.
Disconnect the fuel filler hose (A), the leveling hose (B).
Disconnect the fuel filler hose (A), the leveling hose (B).
Remove the left - rear wheel ＆ tire and the wheel house.
Unscrew the mounting bolt (A).
Remove the fuel filler neck assembly after unscrewing the mounting screws (A).
Installation is reverse of removal.
Filler-neck assembly installation screw:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Filler-neck assembly bracket installation bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
