Removal
1.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.

2.

Disconnect the engine wiring harnness.

(1)

The intake OCV (Oil control valve) connector (A) and the exhaust OCV (Oil control valve) connector (B).

(2)

The ignition coil connectors (A), the injector extension connector (B), the VIS (Variable intake system) connector (C) and the PCSV (Purge control solenoid valve) connector (D).

(3)

The FPCV (Fuel pressure control valve) connector (A), the intake CMPS (Camshaft position sensor) connector (B) and the exhaust CMPS (Camshaft position sensor) connector (C).

3.

Relax the engine wiring bracket installtion bolts (A).

4.

Disconnect the connector (A), and then remove the sensor (B).

Яндекс.Метрика