3.
Open the service cover (A) after loosening the screws (B).
Release the residual pressure in the fuel line.
(Refer to Fuel Delivery System - "Release Pressure in Fuel Line")
Fold the rear seat cushion.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+GDI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9191%5E91910010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Rear Seat Assembly")</a>
Open the service cover (A) after loosening the screws (B).
Disconnect the fuel pump connector (A).
Disconnect the fuel feed quick-connector (B) and the vapor tube quick-connector (C).
Lift the vehicle and support the fuel tank with a jack (A).
Disconnect the fuel filler hose (A), the leveling hose (B) and the ventilation hose (C).
Remove the under cover (A) after remove the mounting nuts (B).
Remove the fuel tank mounting bolts (A) and then remove the fuel tank (B).
Installation is reverse of removal.
Fuel tank installation bolt:
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
