4.
Remove the exhaust manifold heat protector (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Remove the engine cover.
Disconnect the battery negative terminal.
Remove the front muffler.
(Refer to Intake and Exhaust Manifold - "Muffler" )
Remove the exhaust manifold heat protector (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Remove the exhaust manifold stay (A).
Tightening torque:
39.2 ~ 49.0N.m (4.0 ~ 5.0kgf.m, 28.9 ~ 36.2lb-ft)
Remove the exhaust manifold (A) and gasket.
Tightening torque:
29.4 ~ 41.2N.m (3.0 ~ 4.2kgf.m, 21.7 ~ 30.4lb-ft)
When installing the exhaust manifold, with a new gasket.
When installing the exhaust manifold, tighten the nuts with pre-torque first and then tighten the nuts with specified torque in the sequence shown.
Install in the reverse order of removal.
