3.
Disconnect the breather hose (A).
Remove the engine cover.
Disconnect the battery negative terminal.
Disconnect the breather hose (A).
Disconnect the PCV hose (A).
Remove the ignition coil.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=341&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E4+MPI&ec=&firstnodedesc=Engine+Electrical+System&sitinfolist=11%5E1105%5E11050100%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1105%5E11050100%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1105%5E11050100%5Enone%5E801%5E4%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Eletrical System -"Ignition Coil")</a>
Remove the cylinder head cover (A) with it`s gasket (B).
Install the cylinder head cover (A) with a new gasket (B).
Do not reuse the disassembled gasket.
Tighten the cylinder head cover bolts (A) with the order and steps.
Tightening torque
1st step:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2nd step:
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Install the ignition coil.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=341&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E4+MPI&ec=&firstnodedesc=Engine+Electrical+System&sitinfolist=11%5E1105%5E11050100%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1105%5E11050100%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1105%5E11050100%5Enone%5E801%5E4%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Eletrical System -"Ignition Coil")</a>
Connect the PCV hose (A).
Connect the breather hose (A).
Connect the battery negative terminal.
Install the engine cover.
