1.
Install the camshaft (A).
Install the camshaft (A).
Install the camshaft bearing caps (A).
Tightening torque :
12.7 ~ 14.7N.m (1.3 ~ 1.5kgf.m, 9.4 ~ 10.8lb-ft)
Install the camshaft sprocket and tighten the bolt to the specified torque.
Temporarily install the camshaft sprocket bolt (C).
Hold the portion (A) of the camshaft with a hexagonal wrench, and tighten the bolt (C) with a wrench (B).
Tightening torque :
68.6 ~ 73.5N.m (7.0 ~ 7.5kgf.m, 50.6 ~ 54.2lb-ft)
Install the vacuum pump (A) with new gasket (B).
Tightening torque :
10.8 ~ 14.7N.m (1.1 ~ 1.5kgf.m, 8.0 ~ 10.8lb-ft)
Apply engine oil to the O-ring(A) of vacuum pump shaft before assembling vacuum pump.
Install the timing chain.
(Refer to Timing System – “Timing Chain”)
Install the cylinder head cover.
(Refer to Cylinder Head Assembly – “Cylinder Head Cover”)
