13670815

1.

Install the jack to the edge of upper oil pan to support the engine.

note

Insert the rubber block between jack and oil pan.

2.

Disconnect the ground cable (A).

Tightening torque:

10.8 ~ 13.7N.m (1.1 ~ 1.4kgf.m, 8.0 ~ 10.1lb-ft)

3.

Remove the engine mounting support bracket (A).

Tightening torque

Nut (B) :

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Bolt (C), Nuts (D) :

58.8 ~ 73.5N.m (6.0 ~ 7.5kgf.m, 43.4 ~ 54.2lb-ft)

4.

Remove the engine mounting support bracket (E).

Tightening torque :

49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)

5.

Install in the reverse order of removal.

1.

Remove the roll rod bracket (A).

Tightening torque

Bolts (B):

49.0 ~ 63.7N.m ( 5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)

Nut (C):

107.9 ~ 127.5N.m (11.0 ~ 13.0kgf.m, 79.6 ~ 94.0lb-ft)

2.

Remove the roll rod mounting support bracket (A).

Tightening torque :

49.0 ~ 68.6N.m ( 5.0 ~ 7.0kgf.m, 36.2 ~ 50.6lb-ft)

3.

Install in the reverse order of removal.

1.

Remove the battery and battery tray.

<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=348&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E6+TCI%2DU2&firstnodedesc=Engine+Electrical+System&sitinfolist=11%5E1125%5E11250200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E348%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1125%5E11250200%5Enone%5E801%5E4%5EENG%5EKM%5EJD12%5E2013%5Een%5E348%5Enone%5Enone%5Enone%5ESHOP%5E%2411%5E1125%5E11250200%5Enone%5E801%5E3%5EENG%5EKM%5EJD12%5E2013%5Een%5E348%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Engine Electrical System - "Battery")</a>

2.

Remove the under cover.

3.

Install the jack to the edge of transaxle.

4.

Remove the cover (A).