3.
Remove the rear oil seal (A).
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic transaxle")
Remove the manual transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle")
Automatic transaxle : Remove the drive plate.
(Refer to Cylinder Block – “Drive Plate”)
Manual transaxle : Remove the flywheel.
(Refer to Cylinder Block – “Flywheel”)
Remove the rear oil seal (A).
Install the rear oil seal.
Apply engine oil to a new oil seal lip.
Using the SST(09214-2A100, 09231-H1100) and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.
Always use new oil seal.
Install in the other parts reverse order of removal.
