1.
Install the oil strainer (A).
Tightening torque
Bolts :
19.6 ~ 26.5N.m (2.0 ~ 2.7kgf.m, 14.5 ~ 19.5lb-ft)
Nuts :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Install the oil strainer (A).
Tightening torque
Bolts :
19.6 ~ 26.5N.m (2.0 ~ 2.7kgf.m, 14.5 ~ 19.5lb-ft)
Nuts :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Apply liquid gasket evenly to the mating surface of oil pan.
Standard liquid gasket : LOCTITE 5900, LOCTITE 5900H, THREE BOND 1217H
Check that the mating surfaces are clean and dry before applying liquid gasket.
Apply liquid gasket in a 3mm wide bead without stopping.Assemble the oil pan in 5 minutes after applying the liquid gasket.
After assembly, wait at least 30 minutes before filling the engine with oil.
Be sure to apply liquid gasket on T-joint of oil pan.
Be careful not to press metal gasket protruded from lower face of chain case and bedplate when applying liquid gasket and assembling the oil pan.
Install the oil pan (A).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Fill with engine oil.
Install the engine under cover.
