4.
Remove the rear oil seal(A).
Remove the transaxle assembly.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=tr&mmcid=245&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+GDI&ec=&firstnodedesc=Manual+Transaxle+System&sitinfolist=51%5E5105%5E51050100%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Etr%5E245%5Enone%5Enone%5Enone%5ESHOP%5E%2451%5E5105%5E51050100%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Etr%5E245%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Manual Transaxle System - "Manual Transaxle")</a>
MT : Remove the flywheel.
(Refet to Cylinder Block - "FlyWheel")
AT : Remove the drive plate.
(Refet to Cylinder Block - "Drive Plate")
Remove the rear oil seal(A).
Install the rear oil seal.
Apply engine oil to a new oil seal lip.
Using the SST(09231-H1100, 09231-2B200) and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.
MT : Install the flywheel.
(Refet to Cylinder Block - "FlyWheel")
AT : Install the drive plate.
(Refet to Cylinder Block - "Drive Plate")
Install the transaxle assembly.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=tr&mmcid=245&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+GDI&ec=&firstnodedesc=Manual+Transaxle+System&sitinfolist=51%5E5105%5E51050100%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Etr%5E245%5Enone%5Enone%5Enone%5ESHOP%5E%2451%5E5105%5E51050100%5Enone%5E801%5E8%5EENG%5EKM%5EJD12%5E2013%5Etr%5E245%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Manual Transaxle System - "Manual Transaxle")</a>
