2.
Remove the battery (A) and ECM (B).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the battery (A) and ECM (B).
Remove the master cylinder.
(Refer to Master Cylinder)
Disconnect the vacuum hose (A) from the brake booster.
Remove the snap pin (A) and clevis pin (B).
Remove the mounting nuts (A).
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Remove the brake booster (A).
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the vacuum hose (A) from the brake booster.
Remove the master cylinder.
(Refer to Master cylinder)
Remove the snap pin (A) and clevis pin (B).
Remove the mounting nuts (A).
Tightening torque :
16.7 ~ 25.4 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Remove the connector bracket (A).
Remove the clutch regulator assembly (A). [MT only]
Install the jack to the edge of oil pan to support the engine.
Insert the rubber block between jack and oil pan.
Remove the engine mounting support bracket.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=109&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1215%5E12150200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E109%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">G 1.6 MPI (Refer to Engine Mechanical System – “Engine mounting”)</a>
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=341&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E4+MPI&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1215%5E12150200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E341%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">G 1.4 MPI (Refer to Engine Mechanical System – “Engine mounting”)</a>
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=348&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E6+TCI%2DU2&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1215%5E12150200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E348%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">D 1.6 TCI-U2 (Refer to Engine Mechanical System – “Engine mounting”)</a>
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=349&group=SHOP&pdftype=&cat1=2013+%3E+D+1%2E4+TCI%2DU2&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1215%5E12150200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E348%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">D 1.4 TCI-U2 (Refer to Engine Mechanical System – “Engine mounting”)</a>
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=en&mmcid=88&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+GDI&ec=&firstnodedesc=Engine+Mechanical+System&sitinfolist=12%5E1215%5E12150200%5Enone%5E801%5E1%5EENG%5EKM%5EJD12%5E2013%5Een%5E88%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">G 1.6 GDI (Refer to Engine Mechanical System – “Engine mounting”)</a>
Slowly lower the jack and make space to remove the brake booster.
Remove the brake booster.
