3.
Disconnect the control cable (A).
Remove the floor console assembly.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9151%5E91510010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Floor Console")</a>
Remove the air duct.
Disconnect the control cable (A).
Disconnect the connector (A).
Disconnect the wire mounting clips (B).
Remove the bolt and then the shift lever assembly (C).
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
Install in the reverse order of removal.
Install the cable after placing the shift lever and the transmission manual control lever in the N position.
