3.
Remove the control cable (A).
Remove the floor console assembly.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+GDI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9151%5E91510010%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Floor Console")</a>
Remove the air duct.
Remove the control cable (A).
Remove the retainer (A) and nut (B).
Tightening torque:
11.8 ~ 14.7 N.m (1.2 ~1.5 kgf.m, 8.7 ~ 10.8 lb-ft)
Remove the nut (A) from the manual control lever.
Tightening torque:
(A) : 9.8 ~ 14.7 N.m (1.0 ~1.4 kgf.m, 7.2 ~ 10.8 lb-ft)
Remove the cable (C) from the cable bracket (B) on the Dual Clutch Transmission (DCT).
Remove the shift cable by pulling it toward the interior.
Install in the reverse order of removal.
Install the cable after placing the shift lever and the transmission manual control lever in the N position.
Adjust the control cable.
Place the shift lever in the interior, and the transmission manual control lever, to the N position.
Connect the shift lever (B) in the interior with the shift cable (A).
Lightly push the shift cable towards "F" to tighten the cable.
Tighten the nut (A) to the specified torque.
Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~1.4 kgf.m, 7.2 ~ 10.8 lb-ft)
