2.
After loosening the mounting bolts, remove the front seat assembly (B).
Tightening torque :
34.3 ~ 53.9 N.m (3.5 ~ 5.5 kgf.m, 25.3 ~ 39.8 lb-ft)
Remove the front seat track mounting cover (A).
After loosening the mounting bolts, remove the front seat assembly (B).
Tightening torque :
34.3 ~ 53.9 N.m (3.5 ~ 5.5 kgf.m, 25.3 ~ 39.8 lb-ft)
Disconnect the airbag connector (A), power seat & seat warmer connector connector (B), seat belt buckle connector (C), seat belt remind connector (D).
[Driver's]
[Passenger's]
Install in the reverse order of removal.
SEAT MOUNTING BOLT INSTALLATION PROCEDURE
Set the seat into the most rearward position. Check that each slide is locked, and then tighten the front mounting bolt temporarily.
Set the seat into most forward position. Check that each slide is locked, and then Tighten the rear mounting bolt completely.
Set the seat into the most rearward position. Check the front mounting bolt completely.
Check that the seat operates to and fro smoothy and the locking portion locks properly.
