P0335 is set when CMPS signal is outputted while CKPS signal does not generate. This code is due to CKPS circuit or component failure. If CKPS signal is not inputted during driving, RPM is calculated based on CMPS signal.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Signal monitoring |
•
CKPS circuit
•
CKPS component
•
Abnormal deformation of Crank Shaft tone wheel | ||
Enable Conditions |
•
Engine running | |||
Threshold Value |
•
CMPS signal is outputted while CKPS signal does not generate. | |||
Diagnostic Time |
•
- | |||
Fail Safe | Fuel cut | YES | ||
EGR Off | NO | |||
Fuel Limit | NO | |||
Check Lamp | YES | |||
