ECM judges external signal input in condition that change of water temperature output value is over the 1v then ECM sets P0119.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Rationality check | 1. Poor connection 2. ECTS |
Enable Conditions |
•
No vehicle speed sensor error detected
•
Modeled temp. is higher than 45℃ | |
Threshold Value |
•
Measured temp. stuck
•
The temperature difference between model temp. and actual temp. is higher than 15 ℃. | |
Diagnostic Time |
•
- | |
MIL ON Condition |
•
2 Drive Cycle |
