ECM assumes the power circuit is open and shows P2243 when upstream O2 sensor is lower than 0.2V or higher than 4.7V and internal resistance gets high.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Circuit continuity check | 1. Poor connection 2. Open or short power/ground in signal circuit 3. S1 |
Enable Conditions |
•
sensor voltage is lower than 0.2V or higher than 4.7V | |
Threshold Value |
•
Internal resistance is higher than 950Ω | |
Diagnostic Time |
•
1 sec | |
MIL ON Condition |
•
2 driving cycle |
