Checking oputput signals from CMP during engine running, if the expected number of cam tooth count is not observed, ECM sets P0365.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal check | 1. Poor connection 2. Abnormal assembling state 3. CMPS |
Enable Conditions |
•
No CKP sensor error
•
Gap of CKP sensor wheel detected | |
Threshold Value |
•
On unplausible signal counter more than 10 times. | |
Diagnostic Time |
•
Continuous | |
MIL ON Condition |
•
2 driving cycle |
