The SRSCM sets DTC B132900 if there is any error in communication between DFIS and SRSCM
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Check Data | 1. Short to power in harness. 2. Short to ground in harness. 3. Poor connection of connected part(open). 4. Faulty DFIS. 5. Check SRSCM | |
Enable Conditions |
•
Ignition "ON" | ||
Threshold Value |
•
DFIS communication error - Sensor not connected, - Sensor defect - Wiring fault | ||
Diagnostic Time | Qualification |
•
More than 1s (100ms x 10) | |
De-Qualification |
•
More than 2s (100ms x 20) | ||
