This code is outputted when BCM can't receive data from PSM by CAN Line for 10 sec.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
CAN Comm. Check (BCM ↔ PSM) | 1. IG ON (1) No receiving CAN Data owing to BUS OFF (Check CAN BUS ERROR DTC is being.) (2) BCM CAN High/Low Lines open together (3) Check PSM (Including the related fuses) (4) PSM CAN High/Low Lines open |
Enable Conditions |
•
BCM power on | |
Threshold Value |
•
No message from PSM to BCM for 10 sec. | |
Diagnostic Time |
•
10 sec | |
DTC Erasing Time |
•
DTC is erased immediately after receiving data from PSM. |
