Monitor GDS data
1.

Connect GDS with diagnostic connector.

2.

Warm up the engine to normal engine temperature afte engine starts.

3.

Select "Current Data" mode and monitor "Duct sensor-Floor" parameter.

4.

Is the Duct sensor abnormal ?

▶ Go to "Inspection and Repair" procedure.

▶ This is a intermittent problem caused by poor contact of component or Control Unit.

▶ Thoroughly check the looseness, poor connection, bent, corrison, contamination, deformation or damage of connector.

▶ Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика