IG key "OFF" and engine "OFF".
Disconnect "FUEL SENDER & FUEL MOTOR PUMP" harness connector.
Measure the resistance between "Fuel(+)" terminal and "Fuel(-)" terminal of "FUEL SENDER & FUEL MOTOR PUMP" connector with varying a float.
Position | Capacity (ℓ) | Resistance(Ω) |
Empty | 3.7 | 197 ~ 203 |
1/2 | 26.7 | 64.2 ~ 68.2 |
Sender (Full) | 52.6 | 6 ~ 10 |
Is the measured resistance within the specification?
![]() | ▶ Go to "Verification of Vehicle Repair" procedure. |
![]() | ▶ Replace Fuel sender. |