This code reports an error in LIN line. The purpose is to verify the status of RPAS UNIT, Sensor and Wire when error is detected at RPAS of Rear Center Right Sensor.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal output of Rear Center Right Sensor and LIN line checking | 1. TX line of RPAS-CRH(Rear Center Right Sensor) open or poor connection 2. Ground line of RPAS-CRH(Rear Center Right Sensor) open or poor connection 3. Power line of RPAS-CRH(Rear Center Right Sensor) open or poor connection 4. Replace a sensor after checking a wire of RPAS-CRH(Rear Center Right Sensor) |
Enable Conditions |
•
IG KEY ON, Shift lever R | |
Threshold Value |
•
Sensor fault
•
LIN communnication fault
•
Poor connection
•
LIN line open | |
Diagnostic Time |
•
Immediately | |
DTC Erasing Time |
•
DTC is erased immediately after trouble fixed |
