This code is outputted when BCM can't receive data from SJB by CAN Line for 10 sec.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
CAN Comm. Check (BCM ↔ SJB) | 1. IG ON (1) No receiving CAN Data owing to BUS OFF (Check CAN BUS ERROR DTC is being.) (2) BCM CAN High/Low Lines open together (3) Check SJB (Including the related fuses) (4) SJB CAN High/Low Lines open |
Enable Conditions |
•
BCM power on | |
Threshold Value |
•
No message from SJB to BCM for 10 sec. | |
Diagnostic Time |
•
10 sec. | |
DTC Erasing Time |
•
DTC is erased immediately after receiving data from SJB. |
