The EPB ECU sets this DTC when there is Cluster CAN signal error for 0.5 second.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Monitoring CAN messages | 1. Cluster system 2. IPM system |
Enable conditions |
•
IG ON
•
Battery voltage is between 9V and 16V
•
No CAN Bus off | |
Threshold value |
•
When there is Cluster message(Ignition, ODO, Rear gear position signal, driver door/seat belt, hood, trunk signal, etc) error for 0.5 second | |
Fail-Safe |
•
Automatic release function inhibited |
