The SPAS ECU sends the request messages, such as a gear signal of vehicles, to the Cluster through CAN bus line for SPAS.
The SPAS ECU check the CAN communication line for normal control and if the Cluster message is not received for a 0.5 second, this DTC is set.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Status for receving CAN message from CLU | 1. Open CAN high / Low line 2. CLU(CLUSTER) |
Enable Conditions |
•
IG ON. | |
Threshold vlaue |
•
No CAN signal from CLU | |
Diagnostic Time |
•
No CAN signal for more than 0.5 sec. | |
DTC Erasing Time |
•
- |
