DTC Description

The TPMS ECU monitors the RF signals from the sensors. If no valid RF signal is received from a sensor, this DTC is set. Due to TPMS ECU Internal faults, if TPMS ECU could not receive any signals of sensor (included with all WE sensor), this DTC is set too.

DTC Detecting Condition

Item

Detecting Condition

Possible cause

DTC strategy

Monitoring RF signals

1.

Damaged TPMS ECU(RF receiver circuit)

2.

TPMS sensor which is not fitted in the vehicle specifications

Enable conditions

IG ON

Threshold value

No valid RF data is received over 540 seconds consecutive from any sensor and RF receiver is not reponding

TPMS Lamp

Lamp on (60s flashing and ON)

Яндекс.Метрика