P2455 is set when the measured Differential pressure is above 4721mV the upper limiting value - for more than 1 sec. This code is due to 1) short beween power and signal circuit or 2) faulty is DPS or 3) OPEN in ground circuit.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring |
•
DPS circuit
•
DPS | ||
Enable Conditions |
•
IG KEY "ON" | |||
Threshold Value |
•
Output value Above 4721mV | |||
Diagnostic Time |
•
1.0 sec | |||
Fail Safe | Fuel Cut | NO |
•
Engine check lamp blinks. | |
EGR Off | NO | |||
Fuel Limit | NO | |||
Check Lamp | BLINK |