P1405 is set when CPF is in generation mode to get rid of piled P.M but generation has not completed for exceeding designated time or temperature difference between VGT-CPF sensors signal is over set temperature (40℃) during cold condition. This DTC will be set by foreign materials in the CPF, Malfunctioning of DPS signal, Faulty EGTS - VGT or CPF or circuit malfunction.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring |
•
Dropped regeneration efficiency
•
Clogged CPF
•
DPS circuit
•
DPS component
•
EGTS circuit (VGT,CPF)
•
EGTS component (VGT,CPF) | ||
Enable Conditions |
•
IG KEY "ON" | |||
Threshold Value |
•
DPF Regeneration average mileage is below 65535Km and DPF Regeneration average time is below 2040 seconds. | |||
Diagnostic Time |
•
600ms | |||
Fail Safe | Fuel Cut | NO |
•
Engine check lamp blinks. | |
EGR Off | NO | |||
Fuel Limit | NO | |||
Check Lamp | BLINK |