3.
Remove the driver side shower duct (A) after loosening the screw.
Disconnect the negative (-) battery terminal.
Remove the crash pad lower panel.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9154%5E91540040%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24"target="_blank">(Refer to Body - "Crash Pad Lower Panel")</a>
Remove the driver side shower duct (A) after loosening the screw.
Disconnect the connector (A) and then remove the temperature control actuator (B) after loosening the mounting screws.
Install in the reverse order of removal.
Disconnect the negative (-) battery terminal.
Remove the heater & blower assembly.
(Refer to Heater - "Heater Unit")
Separate the blower unit from the heater unit after loosening 3 screws.
Disconnect the connector (A) and then remove the temperature control actuator (B) after loosening the mounting screws.
Install in the reverse order of removal.
