1.
Remove the cap (B) and remove the nuts, then remove the wiper arm (A).
Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)
Remove the cap (B) and remove the nuts, then remove the wiper arm (A).
Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)
If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm.
Remove the weather strip and the cowl top cover (A) after removing 4 rivets.
Disconnect the washer hose (B) connected to cowl top cover.
Remove the windshield wiper motor and linkage assembly (A) after removing 2 bolts.
Disconnect the wiper motor connector (A) from the wiper motor ＆ linkage assembly.
Hold the wiper motor crank arm and remove the upper linkage (A) from the wiper motor crank arm.
Remove the lower linkage (A) from the wiper motor crank arm.
Hold the arm using the plyer, remove the crank arm (A) after loosening the mounting nut.
Before removing the wiper motor and linkage assembly, make sure that the linkage is stopped at auto stop position.
To install the wiper motor crank arm exactly, check that the linkage is aligned with the crank arm in straight line and the angle of each linkages.
Be careful not to bend the linkage.
Remove the wiper motor (A) with 3 bolts.
