Turn ignition switch OFF and disconnect the negative (-) battery cable.

Remove the fuel tank.

(Refer to Fuel Delivery System - "Fuel Tank")

Disconnect the low pressure fuel quick-connector (A).

Disconnect the low pressure fuel feed line quick-connector (A) from the fuel filter.

Lift the vehicle.

Remove the undercover (A) after removing installation nuts (B).

Place the front heat protector (A) in the direction of the arrow after removing the installation nuts (B).

Remove the fuel line fixing bracket (B) after removing the installation bolt (A).

Remove the fuel line fixing bracket (B) after removing the installation nut (A).

Open the fuel line fixing clip (A) with the (-) driver.

Remove the fuel line under the vehicle. Be careful not to damage the fuel line.