1.
Disconnect the back up lamp switch connector (A).
Disconnect the back up lamp switch connector (A).
Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
Remove the following items;
Engine cover
(Refer to Engine Mechanical System - "Engine Cover")
Air cleaner assembly
(Refer to Engine Mechanical System - "Air Cleaner")
Battery and battery tray
(Refer to Engine Electrical System - "Battery")
Disconnect the back up lamp switch connector (A).
Remove the back up lamp switch (A).
Replace a new one and install the back up lamp switch.
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
