Remove the ignition key from the vehicle.
Disconnect the battery negative cable and wait for at least thirty seconds.
Tighten the curtain airbag mounting bolts.
Tightening torque
: 7.0 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
Never twist the airbag module when installing it. If the module is twisted, airbag module may operate abnormally.
Connect the curtain airbag connector.
Install the roof trim assembly.
<a href="content.asp?vehicletype=Passenger&mfrcode=KM&area=KME&langcode=ENG&modelid=JD12&modelyr=2013&mmctype=bd&mmcid=4&group=SHOP&pdftype=&cat1=2013+%3E+G+1%2E6+MPI&ec=&firstnodedesc=Body+%28Interior+and+Exterior%29&sitinfolist=91%5E9157%5E91570040%5Enone%5E801%5E6%5EENG%5EKM%5EJD12%5E2013%5Ebd%5E4%5Enone%5Enone%5Enone%5ESHOP%5E%24" target="_blank">(Refer to Body - "Roof trim assembly")</a>
Reconnect the battery negative cable.
After installing the curtain airbag (CAB), confirm proper system operation:
Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
