3.
Disconnect the breather hose (A).
Remove the engine cover.
Disconnect the battery negative terminal.
Disconnect the breather hose (A).
Disconnect the PCV hose (A).
Remove the ignition coil.
(Refer to Engine Eletrical System -"Ignition Coil")
Remove the cylinder head cover (A) with it`s gasket (B).
Install the cylinder head cover (A) with a new gasket (B).
Do not reuse the disassembled gasket.
Tighten the cylinder head cover bolts (A) with the order and steps.
Tightening torque
1st step:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2nd step:
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
Install the ignition coil.
(Refer to Engine Eletrical System -"Ignition Coil")
Connect the PCV hose (A).
Connect the breather hose (A).
Connect the battery negative terminal.
Install the engine cover.
