If the system voltage is 2.54~10V, the PCM sets DTC P0562.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal check, low | 1. Poor connection 2. Short to ground in control circuit 3. Charging system 4. Main relay | |
Case 1 | Threshold Value |
•
System voltage is lower than 2.54V. | |
Diagnostic Time |
•
0.5 Sec. | ||
Case 2 | Enable Conditions |
•
Engine speed is higher than 2000rpm. | |
Threshold Value |
•
System voltage is lower than 9.99V. | ||
Diagnostic Time |
•
0.2 Sec. | ||
MIL ON Condition |
•
3 driving cycle | ||
