If the supply voltage to LDWS ECU is lower than specification, LDWS ECU sets DTC C110216.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Supply voltage check | 1. Poor connector connection 2. Over discharging due to defected charging system 3. Defected LDWS ECU | |
Enable Condition |
•
Ignition switch "ON" or engine "ON"
•
No related DTC is stored | ||
Threshold Value |
•
Battery voltage is less than 8.5±0.5V | ||
Detecting Time |
•
10 sec. | ||
Recovery Time |
•
4 sec. | ||
Recovery Condition |
•
Battery voltage is greater than 9.5±0.5V
•
Ignition Switch Off and On | ||
Warning Lamp |
•
LDWS Lamp "ON" | ||
Failsafe | LDW (Lane Departure Warning) |
•
Function inhibited | |
HBA (High Beam Assist) |
•
Function inhibited | ||
FCW (Forward Collision Warning) |
•
Function inhibited | ||
