When the voltage is higher than the expected normal value, the SPAS ECU is expressed as this DTC.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Voltage monitoring | 1. Poor Connection 2. Charging System 3. SPAS ECU | ||
Enable Condition |
•
Ignition "ON" | |||
Threshold Value |
•
Ignition voltage is greater than 16.5 ± 5V. | |||
Fail Safe | PAS ON & SPAS ON | PAS-LED | Error Flash | |
SPAS-LED | Off | |||
Speaker | Error Tone | |||
Cluster | System Fail(2s) -> Error PAS HMI Indicator | |||
PAS ON & SPAS OFF | PAS-LED | Error Flash | ||
SPAS-LED | Off | |||
Speaker | Error Tone | |||
Cluster | Error PAS HMI Indicator | |||
Detecting Time |
•
4000 msec. | |||
Recovery Time |
•
2000 msec. | |||
Recovery Condition |
•
Ingnition voltage is less than 15.5 ± 0.5V. | |||
Test Cycle |
•
10 msec. | |||
