If abnormal zero-setting is detected or no information in the HECU is detected, a failure is recognized.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
Signal Monitoring | 1. Uncalibrated longitudinal G sensor |
Monitoring Period |
•
During longitudinal G sensor's zero-setting | |
Enable Conditions |
•
Serial number of the longitudinal G sensor in the HECU does not confirm to serial number received from sensor | |
Fail-Safe |
•
Limit HAC(Hill-start Assist Control) function. Allow ESP(ESC) control
•
The ESP(ESC) warning lamp is activated |
