DTC Description

Steering angle sensor error can be set when loss of steering angle due to internal fault or open in ECU internal circuit occurs. If steering sensor error occurs EPS ECU stops "damper" and "return" control. Therefore driver can be uncomfortable due to no return force during U-Turn, high speed driving, but there is no problem for driving because basic assist control still operates.

DTC Detecting Condition

Item

Detecting Condition

Possible cause

DTC Strategy

Edge number of motor hall sensor signal counting.

1.

Faulty Steering Angle Sensor

2.

ASP Setting error

Enable Conditions

Ignition "ON".

Threshold Value

Steering Angle Sensor error

- PWM No signal

- PWM Duty range over : <10%, >90%

- PWM Period range over : <4.362ms, > 5.777ms

Fail Safe

EPS warning lamp "ON".

Яндекс.Метрика