BSD ECU sets this code when the messages between BSD ECU from ABS/ESP received abnormal wheel speed signal within the last 500msec.
This code is set, and the BSD Switch LED functions are prohibited and system is down.
Item | Detecting Condition | Possible cause |
DTC Strategy |
•
ECM(EMS) CAN Signal Check | 1. Poor connection 2. Open or short in CAN communication line 3. ECM(EMS) 4. ABS/ESP |
Enable Conditions |
•
IG ON (BSD Switch ON)
•
Engine running | |
Threshold Value |
•
Vehicle speed signal is INVALID | |
Detecting Time |
•
500ms (0.5 second) |
