If the output voltage of EGTS #1 is above threshold value for more than 3 sec., ECM sets DTC P242D00. This fault might be caused by open in signal circuit of EGTS #1.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Open in signal circuit of EGTS #1 2. Faulty EGTS #1 | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
Output signal is below threshold value (40℃/104℉)
•
Open in signal circuit | ||
Detecting Time |
•
3 sec | ||
Fail Safe | MIL |
•
Blink | |
DPF Regeneration OFF |
•
Yes | ||
