This code is set when LH Static Bend Lamp circuit is shorted to ground while LH Static Bend Lamp operating.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Load Monitoring | 1. Poor connection 2. Short to ground in LH Static Bend Lamp circuit 3. Faulty LH Static Bend Lamp 4. Faulty SJB |
Enable Conditions |
•
IG KEY ON. | |
Threshold Value |
•
LH Static Bend Lamp Circuit Short to Ground | |
Diagnostic Time |
•
It immediately sets DTC after fault detects. | |
DTC Erasing Time |
•
Present Failure : IGN SW OFF after fault has been fixed.
•
Memorized Failure : DTC can be erased immediately with GDS. |
