This code is set when the Front RH turn signal lamp circuit is open while the RH turn signal lamp is operating.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Load Monitoring | 1. Poor connection 2. Open Circuit in Front RH turn signal lamp 3. Faulty Front RH turn signal lamp 4. Faulty SJB |
Enable Conditions |
•
Ignition "ON" | |
Threshold Value |
•
Front RH turn signal lamp Circuit Open | |
Diagnostic Time |
•
0.12 sec Retry 2 Times Detection | |
DTC Erasing Time |
•
DTC can be erased immediately with GDS after fault has been fixed.
•
Normal condition after IG "ON" |
