This code is set when the Front LH turn signal lamp circuit is shorted to ground while the LH turn signal lamp is operating.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Load Monitoring | 1. Poor connection 2. Short to Ground in Front LH Turn Signal Lamp 3. Faulty Front LH Turn Signal Lamp 4. Faulty SJB |
Enable Conditions |
•
Ignition "ON" (Hazard = Battery(+)) | |
Threshold Value |
•
Front LH Turn Signal Lamp Circuit is Shorted to Ground
•
Over Current | |
Diagnostic Time |
•
0.12 sec Retry 2 Times Detection | |
DTC Erasing Time |
•
DTC can be erased immediately with GDS after fault has been fixed. |
