If CAN Bus OFF condition is detected, LDWS ECU sets DTC C161688.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
CAN signal monitoring | 1. Poor connector connection 2. Short circuit between CAN high and CAN low line 3. Short in CAN communication line 4. Defected modules that connected to C-CAN | |
Enable Condition |
•
Normal voltage condition(9±0.5 - 16±0.5V) | ||
Threshold Value |
•
CAN Bus OFF | ||
Detecting Time |
•
500 msec. | ||
Recovery Time |
•
0.1 sec. | ||
Recovery Condition |
•
CAN BUS Off condition is released.
•
Ignition Switch Off and On | ||
Warning Lamp |
•
LDWS Lamp "ON" | ||
Failsafe | LDW (Lane Departure Warning) |
•
Function inhibited | |
HBA (High Beam Assist) |
•
Function inhibited | ||
FCW (Forward Collision Warning) |
•
Function inhibited | ||
