If the SPAS ECU detects internal fault concerned hardware, the SPAS ECU sets this DTC.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Internal monitoring | 1. SPAS ECU | ||
Enable Condition |
•
Ignition On | |||
Threshold Value |
•
ECU MICOM error or RAM error or ROM error or EEPROM error | |||
Fail Safe | PAS ON & SPAS ON | PAS-LED | Error Flash | |
SPAS-LED | Off | |||
Speaker | Error Tone | |||
Cluster | System Fail(2s) | |||
PAS ON & SPAS OFF | PAS-LED | Error Flash | ||
SPAS-LED | Off | |||
Speaker | Error Tone | |||
Cluster | Error PAS HMI indicator | |||
Detecting Time |
•
0 msec. | |||
Recovery Time |
•
- | |||
Recovery Condition |
•
Normal condition after power on reset. | |||
Test Cycle |
•
RAM : 10 msec.
•
EEPROM : Ignition On(every IGN cycle)
•
ROM : 10 msec. | |||
