When there is no response from sensor, the SPAS ECU sets this DTC.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Signal monitoring | 1. Poor Connection 2. Parking Sensor | ||
Enable Condition |
•
Intial routine after Ignition On | |||
Threshold Value |
•
Sensor no response and wrong checksum.
•
Measured ringing time does not meet specified ring time. | |||
Fail Safe | PAS ON & SPAS ON | PAS-LED | Error Flash | |
SPAS-LED | Off | |||
Speaker | Error Tone | |||
Cluster | System Fail(2s) -> Error PAS HMI Indicator | |||
PAS ON & SPAS OFF | PAS-LED | Error Flash | ||
SPAS-LED | Off | |||
Speaker | Error Tone | |||
Cluster | Error PAS HMI Indicator | |||
Detecting Time |
•
4 cycles | |||
Recovery Time |
•
4 cycles | |||
Recovery Condition |
•
Normal mode | |||
Test Cycle |
•
360 msec. | |||
